Revision History

This page contains the details of all revisions since the initial release of Met Dynamics Models v2.0.0 on 3 January, 2024.

Please see the Release Notes for a full list of the tools, functions and models available in the current version of Met Dynamics Models.

Met Dynamics Models Revision History

Released 27 May, 2024

Added mass balancing tools to Excel, mdMassBal_TwoProductFormula, mdMassBal_ThreeProductFormula and mdMassBal_nProductFormula. Useful for reconciling/balancing measured data (assays, size distributions etc) across separating steps.
Added option to Excel mdConvert_CumPassToRet() function to specify total quantity passing. Useful when the first cumulative passing value is less than the true total quantity.
Added option to Excel mdInterp_CubicSpline() function to force spline monotonicity.

SysCAD Gravity Concentrator Jig (King) is now multistage. Each connected concentrate stream represents the product of a stage (compartment) in series.
Added scale factor parameter to SysCAD Gravity Concentrator Bazin partition, allows arbitrary scaling of partition values. May be useful as a very simple approximation to product splitter/cutter position. Parameter is default hidden in Access window.
Fix for SysCAD Metso screen model where Rf and Lambda parameters were inadvertently ignored.
Fix for SysCAD Stream Summary pages where multiple feed streams were assigned the same tag name. A single, combined feed is now shown instead.
Fix for SysCAD Dynamic mode Mill unit not showing all available power model options after switching Perfect Mixing Ball Mill model from dynamic to steady-state mode.
Changed some SysCAD tag names and/or structures for Pivot and Stochastic models in Dense Medium Separator and Gravity Concentrator units.

Added option to Perfect Mixing Stirred Mill steady-state and dynamic models allowing user-defined values of breakage rate scaling relationship exponents. Useful for aligning with test work or operating data.
Removed option from AG/SAG Mill (Variable Rates) model in Excel and SysCAD which allowed user to specify spline knot positions (incompatible with Variable Rates model formulation).
Fix for Pump model where flow calculation mode incorrectly returned zero flow rates.
Fixes for Air Classifier (Altun) model:
1. Corrected error where overflow and underflow mass flow rates by size may have been switched.
2. Adjusted signs in model equations to require only positive values of input coefficients, exponents and constants.
3. No longer required to provide ore SG/density as input, not used by the current model formulation.
Various minor numerical stability improvements.

Released 21 February, 2024

New Gravity Classifier model for mechanical (spiral/rake/bowl) and hydraulic classifiers added:

Excel: New mdUnit_GravityClassifier_PlittFlintoff() function available.
SysCAD: New Classifier unit model added, Gravity (Plitt-Flintoff) option available.

Added equations to estimate sharpness constant and bypass constant values.
Excel: Function call signature, input parameters, and results formats all changed to account for new equations (please review existing instances).
SysCAD: Input and results tags changed to account for new equations (please review existing instances).

Fix for Perfect Mixing Stirred Mill model (steady-state and dynamic) where ball size scaling factor was incorrectly inverted.
SysCAD Screen model improvements:

Fix for SysCAD Hydrocyclone model where liquids separation method incorrectly reverts to "Split to UF (User)" when Reid-Plitt or Whiten-Beta model method is selected.
Changed some SysCAD tag names and/or structures for:

Pivot and Stochastic models in Dense Medium Separator and Gravity Concentrator units.
Dense Medium Drum (Baguley) model in Dense Medium Separator unit.

Released 3 January, 2024