Partition (Density, Rho50-Ep)

Description

This article describes the Rho50-Ep ( $\rho _{50}{\text{-}}E_{\rm {p}}$ ) equation for the partition of particles by size and density in a dense medium cyclone.^[1]

The Rho50-Ep model may also be applicable to other dense medium and gravity concentration processes, based indirectly on Rao et al.'s (2003a, 2003b) derivation of the similar Pivot model from the Stochastic model and the presented data analyses.^[2]^[3]

Model theory

This content is available to registered users. Please log in to view.

Excel

The Rho50-Ep partition equation may be invoked from the Excel formula bar with the following function call:

=mdPartition_Rho50_Ep(MeanSize as Range, RD as Range, Rho50 as Range, Ep as Range)

Invoking the function with no arguments will print Help text associated with the model, including a link to this page.

The input parameters and model results are defined below in matrix notation, along with an example image showing the selection of the same cells in the Excel interface:

${\begin{aligned}{\mathit {MeanSize}}&={\begin{bmatrix}{\bar {d}}_{1}{\text{ (mm)}}\\\vdots \\{\bar {d}}_{n}{\text{ (mm)}}\\\end{bmatrix}}\\\\{\mathit {RD}}&={\begin{bmatrix}(\rho _{\rm {S}})_{1}{\text{ (t/m}}^{\text{3}}{\text{)}}&\dots &(\rho _{\rm {S}})_{m}{\text{ (t/m}}^{\text{3}}{\text{)}}\\\end{bmatrix}}\\\\{\mathit {Rho50}}&={\begin{bmatrix}(\rho _{50})_{1}{\text{ (t/m}}^{3}{\text{)}}\\\vdots \\(\rho _{50})_{n}{\text{ (t/m}}^{3}{\text{)}}\\\end{bmatrix}}\\\\{\mathit {Ep}}&={\begin{bmatrix}(E_{\rm {p}})_{1}{\text{ (t/m}}^{3}{\text{)}}\\\vdots \\(E_{\rm {p}})_{n}{\text{ (t/m}}^{3}{\text{)}}\\\end{bmatrix}}\\\\\\{\mathit {mdPartition\_Rho50Ep}}&={\begin{bmatrix}Y_{11}{\text{ (t/h)}}&\dots &Y_{1m}{\text{ (t/h)}}\\\vdots &\ddots &\vdots \\Y_{n1}{\text{ (t/h)}}&\dots &Y_{nm}{\text{ (t/h)}}\\\end{bmatrix}}\end{aligned}}$

Figure 3. Example showing the selection of the MeanSize (blue frame), RD (red frame),

\rho _{50}

(purple frame),

E_{\rm {p}}

(greenframe), and Results (light blue frame) arrays in Excel.

SysCAD

The Rho50-Ep partition is available from the MetDynamics*GravityConcentrator and MetDynamics*DenseMedium unit models.

The sections and variable names used in the SysCAD interface are described in detail in the following tables.

Note that a Con and Partition page is provided provided for each connected concentrate discharge stream of the MetDynamics*GravityConcentrator model.

MD_GravityConcentrator page

The first tab page in the access window will have this name.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Tag	Display	This name tag may be modified with the change tag option.
Condition	Display	OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount	Display	The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc	Display	This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here. If this field is blank, then SysCAD will display the unit class ID.
Requirements
On	CheckBox	This enables the unit. If this box is not checked, then the MassFracToCon option appears below.
MassFracToCon	Input	Only appears if the On field above is not checked. Specifies the fraction of feed mass that reports to the concentrate stream when the model is off.
NumParallelUnits	Input	The number of parallel, identical units to simulate: Feed is divided by the number of parallel units before being sent to the unit model. Unit model products are multiplied back by the same value and returned to the SysCAD product streams. All unit model result values are shown per parallel unit.
Options
ShowQFeed	CheckBox	QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
SizeForPassingFracCalc	Input	Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc	Input	Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm	Display	The total mass flow in each stream.
SolidMassFlow / SQm	Display	The Solids mass flow in each stream.
LiquidMassFlow / LQm	Display	The Liquid mass flow in each stream.
VolFlow / Qv	Display	The total Volume flow in each stream.
Temperature / T	Display	The Temperature of each stream.
Density / Rho	Display	The Density of each stream.
SolidFrac / Sf	Display	The Solid Fraction in each stream.
LiquidFrac / Lf	Display	The Liquid Fraction in each stream.
Passing	Display	The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes	Display	The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.

Con page

The Con page is used to specify the selected model input parameters.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Stage
On	Checkbox	This enables the stage. If off, the feed to this stage passes directly to the next stage (or tail) without partition.
Method	Partition (User)	The partition to concentrate for each size interval is defined by the user.
	Partition (Rho50-Ep)	The partition to concentrate for each size interval is defined by the Rho50-Ep model.
	Partition (Pivot)	The partition to concentrate for each size interval is defined by the Pivot model.
	Partition (Stochastic)	The partition to concentrate for each size interval is defined by the Stochastic model.
	Partition (Bazin)	The partition to concentrate for each size interval is defined by the Bazin model.
	Jig (King)	The partition to concentrate for each size interval is defined by the King jig stratification model.
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
Liquids
LiquidsSeparMethod	Split To Con (User)	Liquids are split to concentrate by a user-defined fraction of liquids in the feed.
	Con Solids Fraction	Sufficient liquids mass is recovered to the concentrate stream to yield the user-defined concentrate solids mass fraction value (if possible).
	Con Liquids Fraction	Sufficient liquids mass is recovered to the concentrate stream to yield the user-defined concentrate liquids mass fraction value (if possible).
ConSolidsFracReqd / Con.SfReqd	Input	Required value of the mass fraction of solids in the concentrate stream. Only visible if Con Solids Fraction is selected.
ConLiquidsFracReqd / Con.LfReqd	Input	Required value of the mass fraction of liquids in the concentrate stream. Only visible if Con Liquids Fraction is selected.
LiqSplitToCon / Con.LiqSplit	Input/Display	The fraction of feed liquids recovered to the concentrate stream.

Partition page

The Partition page is used to specify or display the partition by species and size values.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Distribution
Name	Display	Shows the name of the SysCAD Size Distribution (PSD) quality associated with the feed stream.
IntervalCount	Display	Shows the number of size intervals in the SysCAD Size Distribution (PSD) quality associated with the feed stream.
SpWithPSDCount	Display	Shows the number of species in the feed stream assigned with the SysCAD Size Distribution (PSD) quality.
CumulativePartition
Method	Model/User	Select model-calculated or user-defined cumulative partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
CutDensity / Rho50	Input	Cut density (Rho50) of all particles in each size interval.
EcartProbable / Ep	Input	Ecart Probable (Ep) of all particles in each size interval.
All (All column)	Display	Actual overall cumulative partition to concentrates of all solid species, for each size interval. Excludes solid species not present in the gravity concentrator feed.
CumulativePartition	Display	Cumulative partition to concentrates for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the gravity concentrator feed or not.
All (All row, All column)	Display	Displays the actual, total, cumulative partition of all solids with a particle size distribution property in the feed to concentrates. Excludes solid species not present in the gravity concentrator feed.
All (All row, per species)	Display	Actual overall cumulative partition to concentrates for each solid species, for all size intervals in that species. Excludes solid species not present in the gravity concentrator feed.
Partition
Method	Model/User	Select model-calculated or user-defined partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
CutDensity / Rho50	Input	Cut density (Rho50) of all particles in each size interval.
EcartProbable / Ep	Input	Ecart Probable (Ep) of all particles in each size interval.
All (All column)	Display	Actual overall partition to concentrate of all solid species, for each size interval. Excludes solid species not present in the gravity concentrator feed.
Partition	Display	Partition to concentrate for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the gravity concentrator feed or not.
All (All row, All column)	Display	Displays the actual, total, partition of all solids with a particle size distribution property in the feed to concentrate. Excludes solid species not present in the gravity concentrator feed.
All (All row, per species)	Display	Actual overall partition to concentrate for each solid species, for all size intervals in that species. Excludes solid species not present in the gravity concentrator feed.

MD_DenseMedium page

The first tab page in the access window will have this name.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Tag	Display	This name tag may be modified with the change tag option.
Condition	Display	OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount	Display	The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc	Display	This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here. If this field is blank, then SysCAD will display the unit class ID.
Requirements
On	CheckBox	This enables the unit. If this box is not checked, then the MassFracToSinks option appears below.
MassFracToSinks	Input	Only appears if the On field above is not checked. Specifies the fraction of feed mass that reports to the sinks stream when the model is off.
NumParallelUnits	Input	The number of parallel, identical units to simulate: Feed is divided by the number of parallel units before being sent to the unit model. Unit model products are multiplied back by the same value and returned to the SysCAD product streams. All unit model result values are shown per parallel unit.
Method	Partition (User)	The partition to sinks for each size interval is defined by the user.
	Partition (Rho50-Ep)	The partition to sinks for each size interval is defined by the Rh050-Ep model.
	Partition (Pivot)	The partition to sinks for each size interval is defined by the Pivot model.
	Partition (Stochastic)	The partition to sinks for each size interval is defined by the Stochastic model.
	Drum (Baguley)	The Baguley dense medium drum model is used to determine the partition of solids to sinks and floats for each size interval.
Options
ShowQFeed	CheckBox	QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
ShowQSinks	CheckBox	QSinks and associated tab pages (eg Sp) will become visible, showing the properties of the sinks stream.
ShowQFloats	CheckBox	QFloats and associated tab pages (eg Sp) will become visible, showing the properties of the floats stream.
SizeForPassingFracCalc	Input	Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc	Input	Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm	Display	The total mass flow in each stream.
SolidMassFlow / SQm	Display	The Solids mass flow in each stream.
LiquidMassFlow / LQm	Display	The Liquid mass flow in each stream.
VolFlow / Qv	Display	The total Volume flow in each stream.
Temperature / T	Display	The Temperature of each stream.
Density / Rho	Display	The Density of each stream.
SolidFrac / Sf	Display	The Solid Fraction in each stream.
LiquidFrac / Lf	Display	The Liquid Fraction in each stream.
Passing	Display	The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes	Display	The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.

Rho50-Ep page

The Rho50-E page is used to specify the required model input parameters.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Pivot
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
Liquids
LiquidsSeparMethod	Split To Sinks (User)	Liquids are split to sinks by a user-defined fraction of liquids in the feed.
	Sinks Solids Fraction	Sufficient liquids mass is recovered to the sinks stream to yield the user-defined sinks solids mass fraction value (if possible).
	Sinks Liquids Fraction	Sufficient liquids mass is recovered to the sinks stream to yield the user-defined sinks liquids mass fraction value (if possible).
SinksSolidsFracReqd / Sinks.SfReqd	Input	Required value of the mass fraction of solids in the sinks stream. Only visible if Sinks Solids Fraction is selected.
SinksLiquidsFracReqd / Sinks.LfReqd	Input	Required value of the mass fraction of liquids in the sinks stream. Only visible if Sinks Liquids Fraction is selected.
LiqSplitToSinks / Sinks.LiqSplit	Input/Display	The fraction of feed liquids recovered to the sinks stream.

Partition page

The Partition page is used to specify or display the partition by species and size values.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Distribution
Name	Display	Shows the name of the SysCAD Size Distribution (PSD) quality associated with the feed stream.
IntervalCount	Display	Shows the number of size intervals in the SysCAD Size Distribution (PSD) quality associated with the feed stream.
SpWithPSDCount	Display	Shows the number of species in the feed stream assigned with the SysCAD Size Distribution (PSD) quality.
Partition
Method	Model/User	Select model-calculated or user-defined partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
CutDensity / Rho50	Input	Cut density (Rho50) of all particles in each size interval.
EcartProbable / Ep	Input	Ecart Probable (Ep) of all particles in each size interval.
All (All column)	Display	Actual overall partition to sinks of all solid species, for each size interval. Excludes solid species not present in the dense medium separator feed.
Partition	Display	Partition to sinks for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the dense medium separator feed or not.
All (All row, All column)	Display	Displays the actual, total, partition of all solids with a particle size distribution property in the feed to sinks. Excludes solid species not present in the dense medium separator feed.
All (All row, per species)	Display	Actual overall partition to sinks for each solid species, for all size intervals in that species. Excludes solid species not present in the dense medium separator feed.

About page

This page is provides product and licensing information about the Met Dynamics Models SysCAD Add-On.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
About
HelpLink		Opens a link to the Installation and Licensing page using the system default web browser. Note: Internet access is required.
Information		Copies Product and License information to the Windows clipboard.
Product
Name	Display	Met Dynamics software product name
Version	Display	Met Dynamics software product version number.
BuildDate	Display	Build date and time of the Met Dynamics Models SysCAD Add-On.
License
File		This is used to locate a Met Dynamics software license file.
Location	Display	Type of Met Dynamics software license or file name and path of license file.
SiteCode	Display	Unique machine identifier for license authorisation.
ReqdAuth	Display	Authorisation level required, MD-SysCAD Full or MD-SysCAD Runtime.
Status	Display	License status, LICENSE_OK indicates a valid license, other messages report licensing errors.
IssuedTo	Display	Only visible if Met Dynamics license file is used. Name of organisation/seat the license is authorised to.
ExpiryDate	Display	Only visible if Met Dynamics license file is used. License expiry date.
DaysLeft	Display	Only visible if Met Dynamics license file is used. Days left before the license expires.

Additional notes

Solid species that do not possess a particle size distribution property are split according to the overall mass split of the default particle size distribution species selected in the SysCAD Project Configuration.
If the default particle size distribution species is not present in the unit feed, the overall split of all other species with particle size distributions combined is used, as determined by the model.
Gas phase species report directly to the tail/floats stream without split.

References

↑ Scott, I.A. and Napier-Munn, T.J., 1992. A dense medium cyclone model based on the pivot phenomenon. Transactions of the Institute of Mining and Metallurgy Section C Mineral Processing and Extractive Metallurgy, 101, pp.C61-C76.
↑ Venkoba Rao, B., Kapur, P.C. and Rahul, K., 2003. A general model of particle size-density partitioning in gravity separators. In Proceedings of International Seminar on Mineral Processing MPT (pp. 117-126).
↑ Rao, B.V., Kapur, P.C. and Konnur, R., 2003. Modeling the size–density partition surface of dense-medium separators. International Journal of Mineral Processing, 72(1-4), pp.443-453.

[Scott_and_Napier-Munn_(1992)-1] Scott, I.A. and Napier-Munn, T.J., 1992. A dense medium cyclone model based on the pivot phenomenon. Transactions of the Institute of Mining and Metallurgy Section C Mineral Processing and Extractive Metallurgy, 101, pp.C61-C76.

[Rao_et_al._(2003a)-2] Venkoba Rao, B., Kapur, P.C. and Rahul, K., 2003. A general model of particle size-density partitioning in gravity separators. In Proceedings of International Seminar on Mineral Processing MPT (pp. 117-126).

[Rao_et_al._(2003b)-3] Rao, B.V., Kapur, P.C. and Konnur, R., 2003. Modeling the size–density partition surface of dense-medium separators. International Journal of Mineral Processing, 72(1-4), pp.443-453.

[1]

[2]

[3]

Partition (Density, Rho50-Ep)

Contents

Description

Model theory

Excel