Partition (Size, Reid-Plitt): Difference between revisions

Latest revision as of 15:14, 17 May 2024

Description

This article describes the Reid-Plitt expression for the recovery of classifier feed to underflow, independently reported by Reid (1971) and Plitt (1971).^[1]^[2]

Model theory

Figure 1. Reid-Plitt partition to underflow with values of

{d_{50{\rm {c}}}}=1.0{\text{ (mm)}}

,

m=1.5

, and

{R_{\rm {f}}}=0.2{\text{ (frac)}}

.

The Reid-Plitt expression for corrected partition to underflow, $E_{\rm {uc}}$ (frac), is:

E_{\rm {uc}}({\bar {d}}_{i})=1-\exp \left[-\ln 2\left({\dfrac {{\bar {d}}_{i}}{d_{50{\rm {c}}}}}\right)^{m}\right]

where:

$i$ is the index of the size interval, $i=\{1,2,\dots ,n\}$ , $n$ is the number of size intervals
${\bar {d}}_{i}$ is the geometric mean size of particles in size interval $i$ (mm)
$d_{\rm {50c}}$ is the corrected size at which 50% of the particle mass reports to underflow and 50% to overflow (mm)
$m$ is the sharpness parameter that determines the steepness of the partition curve (-)

The actual partition to underflow , $E_{\rm {ua}}$ (frac), is computed as:

E_{\rm {ua}}({\bar {d}}_{i})=E_{\rm {uc}}({\bar {d}}_{i})+R_{\rm {f}}(1-E_{\rm {uc}}({\bar {d}}_{i}))

where $R_{\rm {f}}$ is the fraction of fines and/or feed liquids split to the underflow (frac).

Plitt (1971) found the value of $m$ was in the range of 1 - 3.8.^[2]

Excel

The Reid-Plitt efficiency curve model may be invoked from the Excel formula bar with the following function call:

=mdPartition_ReidPlitt(MeanSize as Range, d50c as Double, m as double, Rf as Double)

Invoking the function with no arguments will print Help text associated with the model, including a link to this page.

The input parameters and model results are defined below in matrix notation, along with an example image showing the selection of the same cells in the Excel interface:

{\begin{aligned}{\mathit {MeanSize}}&={\begin{bmatrix}{\bar {d}}_{1}{\text{ (mm)}}\\\vdots \\{\bar {d}}_{n}{\text{ (mm)}}\\\end{bmatrix}}\\\\{\mathit {d50c}}&={\big [}d_{50{\rm {c}}}{\text{ (mm)}}{\big ]}\\m&={\big [}m{\big ]}\\{\mathit {Rf}}&={\big [}R_{\rm {f}}{\text{ (frac)}}{\big ]}\\\end{aligned}}

mdPartition\_ReidPlitt={\begin{bmatrix}(E_{\rm {ua}})_{1}{\text{ (frac)}}&\beta ^{*}\\\vdots &[-]\\(E_{\rm {ua}})_{n}{\text{ (frac)}}&[-]\\\end{bmatrix}}

Figure 2. Example showing the selection of the input parameters (shaded cells), and Results (light blue frame) array in Excel.

SysCAD

The Reid-Plitt partition is available from the MetDynamics*Screen, MetDynamics*Hydrocyclone, amd MetDynamics*Classifier unit models.

The sections and variable names used in the SysCAD interface are described in detail in the following tables.

Note that both a Deck page and a Partition page are provided provided for each connected oversize discharge stream of the screen unit model.

MD_Screen page

The first tab page in the access window will have this name.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Tag	Display	This name tag may be modified with the change tag option.
Condition	Display	OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount	Display	The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc	Display	This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here. If this field is blank, then SysCAD will display the unit class ID.
Requirements
On	CheckBox	This enables the unit. If this box is not checked, then the MassFracToOS option appears below.
MassFracToOS	Input	Only appears if the On field above is not checked. Specifies the fraction of feed mass that reports to the overflow stream when the model is off.
Options
ShowQFeed	CheckBox	QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
SizeForPassingFracCalc	Input	Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc	Input	Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm	Display	The total mass flow in each stream.
SolidMassFlow / SQm	Display	The Solids mass flow in each stream.
LiquidMassFlow / LQm	Display	The Liquid mass flow in each stream.
VolFlow / Qv	Display	The total Volume flow in each stream.
Temperature / T	Display	The Temperature of each stream.
Density / Rho	Display	The Density of each stream.
SolidFrac / Sf	Display	The Solid Fraction in each stream.
LiquidFrac / Lf	Display	The Liquid Fraction in each stream.
Passing	Display	The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes	Display	The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.

Deck page

The Deck page is used to specify the required model method and associated input parameters.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Deck
On	Checkbox	This enables the deck. If off, the feed to this deck passes directly to the next deck (or undersize) without partition.
Method	Partition (User)	The partition to oversize for each size interval is defined by the user. Different values can be used for different solids.
	Partition (Reid-Plitt)	The partition to oversize for each size interval is defined by a Reid-Plitt efficiency curve. Different parameters can be used for different solids.
	Partition (Whiten-Beta)	The partition to oversize for each size interval is defined by a Whiten-Beta efficiency curve. Different parameters can be used for different solids.
	Vibrating (Karra)	The Karra vibrating screen model is used to determine the partition of solids to oversize and undersize for each size interval.
	Vibrating (Whiten)	The Whiten vibrating screen model is used to determine the partition of solids to oversize and undersize for each size interval.
	Vibrating (Metso)	The Metso vibrating screen model is used to determine the partition of solids to oversize and undersize for each size interval.
	Fine Wet (Mwale)	The Mwale fine wet screen model is used to determine the partition of solids to oversize and undersize for each size interval.
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
ReidPlitt
OreSpecific	CheckBox	Ore-specific partitions, allows the Reid-Plitt equation parameters to be separately input for all species. Default is all species have the same set of single input properties. This option is only available if there is more than one species in the project with the size distribution property.
d50c	Input	The Reid-Plitt equation d50c corrected cut size parameter.
m	Input	The Reid-Plitt equation sharpness parameter.
Rf	Input	The Reid-Plitt equation recovery of fines/water to underflow parameter.
Liquids
LiquidsSeparMethod	Split To OS (User)	Liquids are split to oversize by a user-defined fraction of liquids in the feed.
	Split To OS (Rf)	Liquids are split to oversize by the Rf fraction specified for the screen model.
	OS Solids Fraction	Sufficient liquids mass is recovered to the oversize stream to yield the user-defined oversize solids mass fraction value (if possible).
	OS Liquids Fraction	Sufficient liquids mass is recovered to the oversize stream to yield the user-defined oversize liquids mass fraction value (if possible).
OSSolidsFracReqd / OS.SfReqd	Input	Required value of the mass fraction of solids in the oversize stream. Only visible if OS Solids Fraction is selected.
OSLiquidsFracReqd / OS.LfReqd	Input	Required value of the mass fraction of liquids in the oversize stream. Only visible if OS Liquids Fraction is selected.
LiqSplitToOS / OS.LiqSplit	Input/Display	The fraction of feed liquids recovered to the oversize stream.

Partition page

The Partition page is used to specify or display the partition by species and size values.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Distribution
Name	Display	Shows the name of the SysCAD Size Distribution (PSD) quality associated with the feed stream.
IntervalCount	Display	Shows the number of size intervals in the SysCAD Size Distribution (PSD) quality associated with the feed stream.
SpWithPSDCount	Display	Shows the number of species in the feed stream assigned with the SysCAD Size Distribution (PSD) quality.
Partition
Method	Model/User	Select model-calculated or user-defined partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
All (All column)	Display	Actual overall partition to oversize of all solid species, for each size interval. Excludes solid species not present in the screen feed.
Partition	Display	Partition to oversize for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the screen feed or not.
All (All row, All column)	Display	Displays the actual, total, partition of all solids with a particle size distribution property in the feed to oversize. Excludes solid species not present in the screen feed.
All (All row, per species)	Display	Actual overall partition to oversize for each solid species, for all size intervals in that species. Excludes solid species not present in the screen feed.

MD_Hydrocyclone page

The first tab page in the access window will have this name.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Tag	Display	This name tag may be modified with the change tag option.
Condition	Display	OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount	Display	The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc	Display	This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here. If this field is blank, then SysCAD will display the unit class ID.
Requirements
On	CheckBox	This enables the unit. If this box is not checked, then the MassFracToUF option appears below.
MassFracToUF	Input	Only appears if the On field above is not checked. Specifies the fraction of feed mass that reports to the underflow stream when the model is off.
Method	Partition (User)	The partition to overflow for each size interval is defined by the user. Different values can be used for different solids.
	Partition (Reid-Plitt)	The partition to overflow for each size interval is defined by a Reid-Plitt efficiency curve. Different parameters can be used for different solids.
	Partition (Whiten-Beta)	The partition to overflow for each size interval is defined by a Whiten-Beta efficiency curve. Different parameters can be used for different solids.
	Nageswararao	The Nageswararao model is used to determine the partition of solids to underflow and overflow for each size interval.
	Narasimha-Mainza (2014)	The Narasimha-Mainza (2014) model is used to determine the partition of solids to underflow and overflow for each size interval.
	Narasimha-Mainza (Multi)	The Narasimha-Mainza (Multi) model is used to determine the partition of solids to underflow and overflow for each size interval.
	Plitt	The Plitt model is used to determine the partition of solids to underflow and overflow for each size interval.
RopingCalcs	CheckBox	Show addition calculations that predict the onset of cyclone underflow roping.
Options
ShowQFeed	CheckBox	QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
ShowQOF	CheckBox	QOF and associated tab pages (eg Sp) will become visible, showing the properties of the overflow stream.
ShowQUF	CheckBox	QUF and associated tab pages (eg Sp) will become visible, showing the properties of the underflow stream.
SizeForPassingFracCalc	Input	Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc	Input	Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm	Display	The total mass flow in each stream.
SolidMassFlow / SQm	Display	The Solids mass flow in each stream.
LiquidMassFlow / LQm	Display	The Liquid mass flow in each stream.
VolFlow / Qv	Display	The total Volume flow in each stream.
Temperature / T	Display	The Temperature of each stream.
Density / Rho	Display	The Density of each stream.
SolidFrac / Sf	Display	The Solid Fraction in each stream.
LiquidFrac / Lf	Display	The Liquid Fraction in each stream.
Passing	Display	The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes	Display	The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.

Cyclone page

The Cyclone page is used to specify the input parameters for the hydrocyclone model.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
ReidPlitt
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
OreSpecific	CheckBox	Ore-specific partitions, allows the Reid-Plitt equation parameters to be separately input for all species. Default is all species have the same set of single input properties. This option is only available if there is more than one species in the project with the size distribution property.
d50c	Input	The Reid-Plitt equation d50c corrected cut size parameter.
m	Input	The Reid-Plitt equation sharpness parameter.
Rf	Input	The Reid-Plitt equation recovery of fines/water to underflow parameter.
Liquids
LiquidsSeparMethod	Split To UF (User)	Liquids are split to underflow by a user-defined fraction of liquids in the feed.
	Split To UF (Model)	Liquids are split to underflow by a fraction computed by the associated model.
	UF Solids Fraction	Sufficient liquids mass is recovered to the underflow stream to yield the user-defined underflow solids mass fraction value (if possible).
	UF Liquids Fraction	Sufficient liquids mass is recovered to the underflow stream to yield the user-defined underflow liquids mass fraction value (if possible).
UFSolidsFracReqd / UF.SfReqd	Input	Required value of the mass fraction of solids in the underflow stream. Only visible if UF Solids Fraction is selected.
UFLiquidsFracReqd / UF.LfReqd	Input	Required value of the mass fraction of liquids in the underflow stream. Only visible if UF Liquids Fraction is selected.
LiqSplitToUF / UF.LiqSplit	Input/Display	The fraction of liquids recovered to underflow.

Partition page

The Partition page is used to specify or display the partition by species and size values.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Distribution
Name	Display	Shows the name of the SysCAD Size Distribution (PSD) quality associated with the feed stream.
IntervalCount	Display	Shows the number of size intervals in the SysCAD Size Distribution (PSD) quality associated with the feed stream.
SpWithPSDCount	Display	Shows the number of species in the feed stream assigned with the SysCAD Size Distribution (PSD) quality.
Partition
Method	Model/User	Select model-calculated or user-defined partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
All (All column)	Display	Actual overall partition to overflow of all solid species, for each size interval. Excludes solid species not present in the cyclone feed.
Partition	Display	Partition to overflow for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the cyclone feed or not.
All (All row, All column)	Display	Displays the actual, total, partition of all solids with a particle size distribution property in the feed to overflow. Excludes solid species not present in the cyclone feed.
All (All row, per species)	Display	Actual overall partition to overflow for each solid species, for all size intervals in that species. Excludes solid species not present in the cyclone feed.

Roping page

This page displays the results for hydrocyclone roping limit calculations. The page is only visible if Roping is selected on the MD_Hydrocyclone page.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Roping
Underflow
SolidsVolFrac / Svf	Display	Volume fraction of solids in the cyclone underflow stream.
SPOC	Display	SPOC volume fraction of solids in the cyclone underflow roping limit.

MD_Classifier page

The first tab page in the access window will have this name.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Tag	Display	This name tag may be modified with the change tag option.
Condition	Display	OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount	Display	The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc	Display	This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here. If this field is blank, then SysCAD will display the unit class ID.
Requirements
On	CheckBox	This enables the unit. If this box is not checked, then the MassFracToUF option appears below.
MassFracToUF	Input	Only appears if the On field above is not checked. Specifies the fraction of feed mass that reports to the underflow stream when the model is off.
Method	Partition (User)	The partition to underflow for each size interval is defined by the user. Different values can be used for different solids.
	Partition (Reid-Plitt)	The partition to underflow for each size interval is defined by a Reid-Plitt efficiency curve. Different parameters can be used for different solids.
	Partition (Whiten-Beta)	The partition to underflow for each size interval is defined by a Whiten-Beta efficiency curve. Different parameters can be used for different solids.
	Air Classifier (Altun)	The Altun air classifier model is used to determine the partition of solids to underflow for each size interval.
	Gravity (Plitt-Flintoff)	The Plitt-Flintoff gravity classifier model is used to determine the partition of solids to underflow for each size interval.
Options
ShowQFeed	CheckBox	QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
ShowQOF	CheckBox	QOF and associated tab pages (eg Sp) will become visible, showing the properties of the overflow stream.
ShowQUF	CheckBox	QUF and associated tab pages (eg Sp) will become visible, showing the properties of the underflow stream.
SizeForPassingFracCalc	Input	Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc	Input	Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm	Display	The total mass flow in each stream.
SolidMassFlow / SQm	Display	The Solids mass flow in each stream.
LiquidMassFlow / LQm	Display	The Liquid mass flow in each stream.
VolFlow / Qv	Display	The total Volume flow in each stream.
Temperature / T	Display	The Temperature of each stream.
Density / Rho	Display	The Density of each stream.
SolidFrac / Sf	Display	The Solid Fraction in each stream.
LiquidFrac / Lf	Display	The Liquid Fraction in each stream.
Passing	Display	The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes	Display	The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.

Classifier page

The Classifier page is used to specify the input parameters for the classifier model.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
ReidPlitt
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
OreSpecific	CheckBox	Ore-specific partitions, allows the Reid-Plitt equation parameters to be separately input for all species. Default is all species have the same set of single input properties. This option is only available if there is more than one species in the project with the size distribution property.
d50c	Input	The Reid-Plitt equation d50c corrected cut size parameter.
m	Input	The Reid-Plitt equation sharpness parameter.
Rf	Input	The Reid-Plitt equation recovery of fines/water to underflow parameter.
Liquids
LiquidsSeparMethod	Split To UF (User)	Liquids are split to underflow by a user-defined fraction of liquids in the feed.
	Split To UF (Model)	Liquids are split to underflow by a fraction computed by the associated model.
	UF Solids Fraction	Sufficient liquids mass is recovered to the underflow stream to yield the user-defined underflow solids mass fraction value (if possible).
	UF Liquids Fraction	Sufficient liquids mass is recovered to the underflow stream to yield the user-defined underflow liquids mass fraction value (if possible).
UFSolidsFracReqd / UF.SfReqd	Input	Required value of the mass fraction of solids in the underflow stream. Only visible if UF Solids Fraction is selected.
UFLiquidsFracReqd / UF.LfReqd	Input	Required value of the mass fraction of liquids in the underflow stream. Only visible if UF Liquids Fraction is selected.
LiqSplitToUF / UF.LiqSplit	Input/Display	The fraction of liquids recovered to underflow.

Partition page

The Partition page is used to specify or display the partition by species and size values.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Distribution
Name	Display	Shows the name of the SysCAD Size Distribution (PSD) quality associated with the feed stream.
IntervalCount	Display	Shows the number of size intervals in the SysCAD Size Distribution (PSD) quality associated with the feed stream.
SpWithPSDCount	Display	Shows the number of species in the feed stream assigned with the SysCAD Size Distribution (PSD) quality.
Partition
Method	Model/User	Select model-calculated or user-defined partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
All (All column)	Display	Actual overall partition to underflow of all solid species, for each size interval. Excludes solid species not present in the classifier feed.
Partition	Display	Partition to underflow for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the classifier feed or not.
All (All row, All column)	Display	Displays the actual, total, partition of all solids with a particle size distribution property in the feed to underflow. Excludes solid species not present in the classifier feed.
All (All row, per species)	Display	Actual overall partition to underflow for each solid species, for all size intervals in that species. Excludes solid species not present in the classifier feed.

About page

This page is provides product and licensing information about the Met Dynamics Models SysCAD Add-On.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
About
HelpLink		Opens a link to the Installation and Licensing page using the system default web browser. Note: Internet access is required.
Information		Copies Product and License information to the Windows clipboard.
Product
Name	Display	Met Dynamics software product name
Version	Display	Met Dynamics software product version number.
BuildDate	Display	Build date and time of the Met Dynamics Models SysCAD Add-On.
License
File		This is used to locate a Met Dynamics software license file.
Location	Display	Type of Met Dynamics software license or file name and path of license file.
SiteCode	Display	Unique machine identifier for license authorisation.
ReqdAuth	Display	Authorisation level required, MD-SysCAD Full or MD-SysCAD Runtime.
Status	Display	License status, LICENSE_OK indicates a valid license, other messages report licensing errors.
IssuedTo	Display	Only visible if Met Dynamics license file is used. Name of organisation/seat the license is authorised to.
ExpiryDate	Display	Only visible if Met Dynamics license file is used. License expiry date.
DaysLeft	Display	Only visible if Met Dynamics license file is used. Days left before the license expires.

References

↑ Reid, K.J., 1971. Derivation of an equation for classifier-reduced performance curves. Canadian Metallurgical Quarterly, 10(3), pp.253-254.
↑ ^2.0 ^2.1 Plitt, L.R., 1971. The analysis of solid-solid separations in classifiers. CIM bulletin, 64(708), pp.42-47.

[Reid_(1971)-1] Reid, K.J., 1971. Derivation of an equation for classifier-reduced performance curves. Canadian Metallurgical Quarterly, 10(3), pp.253-254.

[Plitt_(1971)-2] 2.0 ^2.1 Plitt, L.R., 1971. The analysis of solid-solid separations in classifiers. CIM bulletin, 64(708), pp.42-47.

[1]

[2]

@@ Line 7: / Line 7: @@
 [[File:PartitionReidPlitt1.png|thumb|450px|Figure 1. Reid-Plitt partition to underflow with values of <math>{d_{50 \rm c}} = 1.0 \text{ (mm)}</math>,  <math>m = 1.5</math>, and  <math>{R_{\rm f}} = 0.2 \text{ (frac)}</math>.]]
-The '''Reid-Plitt''' expression for ''corrected'' partition to underflow, <math>E_{\rm uc}</math> (frac), is:
+{{Model theory (Text, Reid-Plitt Efficiency Curve)}}
-:<math>E_{\rm uc}(\bar d_i) = 1 - \exp \left [ - \ln 2 \left ( \dfrac{\bar d_i}{d_{50 \rm c}} \right )^m \right ]</math>
+Plitt (1971) found the value of <math>m</math> was in the range of 1 - 3.8.{{Plitt (1971)}}
-where:
-* <math>i</math> is the index of the size interval, <math>i = \{1,2,\dots,n\}</math>, <math>n</math> is the number of size intervals
-* <math>\bar d_{i}</math> is the [[Conversions|geometric mean size]] of particles in size interval <math>i</math> (mm)
-* <math>d_{\rm 50c}</math> is the ''corrected'' size at which 50% of the particle mass reports to underflow and 50% to overflow (mm)
-* <math>m</math> is the sharpness parameter that determines the steepness of the partition curve (-)
-The ''actual'' partition to underflow , <math>E_{\rm ua}</math> (frac), is computed as:
-:<math>E_{\rm ua}(\bar d_i) = E_{\rm uc}(\bar d_i) + R_{\rm f} (1 - E_{\rm uc}(\bar d_i))</math>
-where:
-* <math>R_{\rm f}</math> is the fraction of fines and/or feed liquids split to the underflow (frac)
-Plitt (1971) found the value of <math>m</math> was in the range of 1 - 3.8.{{Reid (1971)}}
 == Excel ==
@@ Line 77: / Line 62: @@
 == SysCAD ==
-The Reid-Plitt partition is available from the '''{{Name (Text, Company Name)|nospace=1}}*Screen''' and '''{{Name (Text, Company Name)|nospace=1}}*Hydrocyclone''' unit models.
+The Reid-Plitt partition is available from the '''{{Name (Text, Company Name)|nospace=1}}*Screen''', '''{{Name (Text, Company Name)|nospace=1}}*Hydrocyclone''', amd '''{{Name (Text, Company Name)|nospace=1}}*Classifier''' unit models.
 The sections and variable names used in the SysCAD interface are described in detail in the following tables.
@@ Line 95: / Line 80: @@
 {{SysCAD (Text, Help Link)}}
-|- style="vertical-align:top;"
-|OreSpecific
-|CheckBox
-|
-* Ore-specific partitions, allows the Reid-Plitt equation parameters to be separately input for all species.
-* Default is all species have the same set of single input properties.
-* This option is only available if there is more than one species in the project with the size distribution property.
 |-
-|d50c
+! colspan="3" style="text-align:left;" |''ReidPlitt''
-|Input
-|The Reid-Plitt equation d50c corrected cut size parameter.
+{{SysCAD (Text, Partition, Reid-Plitt)}}
-|-
-|m
-|Input
-|The Reid-Plitt equation sharpness parameter.
-|-
-|Rf
-|Input
-|The Reid-Plitt equation recovery of fines/water to underflow parameter.
 {{SysCAD (Text, Screen, Liquids)|method=1}}
@@ Line 134: / Line 104: @@
 {{SysCAD (Text, Help Link)}}
-|- style="vertical-align:top;"
+{{SysCAD (Text, Partition, Reid-Plitt)}}
-|OreSpecific
-|CheckBox
-|
-* Ore-specific partitions, allows the Reid-Plitt equation parameters to be separately input for all species.
-* Default is all species have the same set of single input properties.
-* This option is only available if there is more than one species in the project with the size distribution property.
-|-
-|d50c
-|Input
-|The Reid-Plitt equation d50c corrected cut size parameter.
-|-
-|m
-|Input
-|The Reid-Plitt equation sharpness parameter.
-|-
-|Rf
-|Input
-|The Reid-Plitt equation recovery of fines/water to underflow parameter.
 {{SysCAD (Text, Hydrocyclone, Liquids)|method=0}}
@@ Line 161: / Line 113: @@
 {{SysCAD (Page, Hydrocyclone, Roping)|WhitenBeta=true}}
+{{SysCAD (Page, Classifier, DLL*Classifier)}}
+==== Classifier page ====
+The Classifier page is used to specify the input parameters for the classifier model.
+{{SysCAD (Text, Table Header)}}
+|-
+! colspan="3" style="text-align:left;" |''ReidPlitt''
+{{SysCAD (Text, Help Link)}}
+{{SysCAD (Text, Partition, Reid-Plitt)}}
+{{SysCAD (Text, Hydrocyclone, Liquids)|method=0}}
+|}
+{{SysCAD (Page, Hydrocyclone, Partition)|ActionU=Partition|ActionL=partition|DestinationU=Underflow|DestinationL=underflow|UnitL=classifier}}
 {{SysCAD (Page, About)}}

Partition (Size, Reid-Plitt): Difference between revisions

Latest revision as of 15:14, 17 May 2024

Contents

Description

Model theory

Excel