Partition (Density, Pivot): Difference between revisions

Latest revision as of 15:18, 17 May 2024

Description

This article describes the Pivot model equation for the partition of particles by size and density in a dense medium cyclone.^[1]

The Pivot model may also be applicable to other dense medium and gravity concentration processes, based indirectly on Rao et al.'s (2003) derivation of the Pivot model from the Stochastic model and the presented data analyses.^[2]

Model theory

Figure 1. Pivot model partition to sinks. Each coloured line represents a particle class with the geometric mean size indicated in the series label. The pivot point is evident at a density of 2.0 t/m³.

Figure 2. Pivot model partition to sinks, using the same model parameters as Figure 1. Each coloured line represents a density class with the specific gravity indicated in the series label.

Scott and Napier-Munn (1992) derived an empirical equation that describes the partition of particles of a given size and density to the sinks stream of a dense medium cyclone.^[1]

Scott and Napier-Munn's approach is based on the observed pivot phenomenon where the partition curves of particles of all sizes appear to 'pivot' at a unique density value, as illustrated in Figure 1.

The proposed Pivot model equation is:

Y_{ij}={\dfrac {1}{1+\exp \left\{\ln({Y_{\rm {p}}}^{-1}-1)+\ln 3\left({\dfrac {\rho _{\rm {p}}-(\rho _{\rm {S}})_{ij}}{k{\bar {d_{i}}}^{n}}}\right)\right\}}}

where:

$i$ is the index of the size interval, $i=\{1,2,\dots ,q\}$ , $q$ is the number of size intervals
$j$ is the index of the density class, $j=\{1,2,\dots ,m\}$ , $m$ is the number of density classes
$Y_{ij}$ is the fraction of the mass of particles in size class $i$ and density class $j$ which are partitioned (recovered) to the sinks stream (frac)
$\rho _{\rm {p}}$ is the pivot density (t/m³)
$\rho _{\rm {S}}$ is the particle density (t/m³)
$Y_{\rm {p}}$ is the partition to sinks at the pivot density (frac)
$k$ is the Ecart Probable size coefficient
$n$ is the Ecart Probable size exponent
${\bar {d}}_{i}$ is the geometric mean size of particles in size interval $i$ (mm)

Partition metrics

Several metrics are provided to characterise the Pivot model partition curve.

The $d_{50}$ , also known as the cut or separation size, is defined as the size of a particle of a given density which has an even (50%) chance of appearing in either the sinks or floats stream. The $d_{50}$ size is obtained by rearranging the Pivot model:

d_{50}=\left({\dfrac {\ln 3}{k}}{\dfrac {(\rho _{j}-\rho _{\rm {p}})}{\ln({Y_{\rm {p}}}^{-1}-1)}}\right)^{\frac {1}{n}}

which is only defined when $(\rho _{j}>\rho _{\rm {p}},Y_{\rm {p}}\leq 0.5)$ or $(\rho _{j}<\rho _{\rm {p}},Y_{\rm {p}}\geq 0.5)$

The $\rho _{50}$ , also known as the cut or separation density, is defined as the density of a particle of a given size which has an even (50%) chance of appearing in either the sinks or floats stream. The $\rho _{50}$ density is obtained by rearranging the Pivot model:

\rho _{50}=\rho _{\rm {p}}+{\dfrac {k{\bar {d_{i}}}^{n}}{\ln 3}}\ln({Y_{\rm {p}}}^{-1}-1)

The Ecart Probable, or $E_{\rm {p}}$ , is a measure of the deviation of a partition curve from a perfect separation, and is typically defined for density separations as:

E_{\rm {p}}={\dfrac {\rho _{75}-\rho _{25}}{2}}

where $\rho _{75}$ and $\rho _{25}$ are the densities of particles which have a 75% and 25% probability, respectively, of appearing in the sinks stream.

Middlings

Gravity concentrators such as jigs, spirals and shaking tables produce a bed or band of partially stratified components at the point of discharge. Portions of the bed or band are then typically directed to product streams by a physical device, such as a weir, 'splitter' or 'cutter'. These devices are usually adjustable, and can be arranged to recover arbitrary fractions of the bed or band.

From a physical standpoint, adjusting the discharge device to recover more of the bed or band has the effect of recovering the both the portion from the previous position plus the portion in between the previous and new positions. As more mass is recovered by this process, the partition curve effectively 'shifts upwards'. The partition curve is thus representing the cumulative recovery of mass from all positions between the beginning of the bed/band and the discharge device position.

Mathematically, the partition curve generated by such a gravity concentration method should also be considered a cumulative recovery of mass to concentrate. When multiple product streams exist, e.g. concentrate and middlings, the partition of components to each individual product stream will be the difference between the cumulative partition curves at each product stream position.^[3] That is,

y_{ij,s}={\begin{cases}Y_{ij,s}&s=1\\\max \left(0,Y_{ij,s}-Y_{ij,s-1}\right)&s>1\\\end{cases}}

where:

$s$ is the index of the product stream, i.e. $s=1$ is the first concentrate stream, $s>1$ are subsequent lower-grade concentrate or middlings streams
$y_{ij,s}$ is the mass fraction of particles in the feed stream in size class $i$ and density class $j$ which are partitioned to the product stream $s$ (frac)
$Y_{ij,s}$ is the cumulative mass fraction of particles in the feed stream in size class $i$ and density class $j$ which are partitioned to all the products streams up to and including $s$ (frac)
The $\max$ term prevents negative partition values

The cumulative recovery formulation described above is physically and mathematically distinct from staged recovery processes which apply partition curves to the unrecovered streams of previous partition steps.

Excel

The Pivot partition equation may be invoked from the Excel formula bar with the following function call:

=mdPartition_Pivot(MeanSize as Range, RD as Range, Yp as Double, rhop as Double, k as Double, n as Double, Optional returnPartitionMetrics as Bool = false)

Invoking the function with no arguments will print Help text associated with the model, including a link to this page.

The input parameters and model results are defined below in matrix notation, along with an example image showing the selection of the same cells in the Excel interface:

${\begin{aligned}MeanSize&={\begin{bmatrix}{\bar {d}}_{1}{\text{ (mm)}}\\\vdots \\{\bar {d}}_{q}{\text{ (mm)}}\\\end{bmatrix}}\\\\RD&={\begin{bmatrix}(\rho _{\rm {S}})_{1}{\text{ (t/m}}^{\text{3}}{\text{)}}&\dots &(\rho _{\rm {S}})_{m}{\text{ (t/m}}^{\text{3}}{\text{)}}\\\end{bmatrix}}\\\\Y_{\rm {p}}&={\big [}Y_{\rm {p}}{\text{ (frac)}}{\big ]}\\rhop&={\big [}\rho _{\rm {p}}{\text{ (t/m}}^{3}{\text{))}}{\big ]}\\k&={\big [}k{\text{ (-)}}{\big ]}\\n&={\big [}n{\text{ (-)}}{\big ]}\\returnPartitionMetrics&={\big [}({\text{True / False)}}{\big ]}\\\\\\mdPartition\_Pivot&={\begin{bmatrix}{\begin{bmatrix}Y_{11}{\text{ (t/h)}}&\dots &Y_{1m}{\text{ (t/h)}}\\\vdots &\ddots &\vdots \\Y_{q1}{\text{ (t/h)}}&\dots &Y_{qm}{\text{ (t/h)}}\\\end{bmatrix}}&{\begin{bmatrix}(\rho _{50})_{1}{\text{ (t/m}}^{3}{\text{)}}\\\vdots \\(\rho _{50})_{q}{\text{ (t/m}}^{3}{\text{)}}\\\end{bmatrix}}^{\rm {*}}&{\begin{bmatrix}(E_{\rm {p}})_{1}{\text{ (t/m}}^{3}{\text{)}}\\\vdots \\(E_{\rm {p}})_{q}{\text{ (t/m}}^{3}{\text{)}}\\\end{bmatrix}}^{\rm {*}}&{\begin{array}{c}{\begin{bmatrix}(d_{50})_{1}{\text{ (mm)}}&\dots &(d_{50})_{m}{\text{ (mm)}}\\\end{bmatrix}}^{\rm {*}}\\\\\\\\\end{array}}\end{bmatrix}}\end{aligned}}$

where:

$n$ is the number of size intervals
$m$ is the number of density classes
$^{*}$ indicates optional results returned if ${\mathit {returnPartitionMetrics}}={\text{True}}$

Figure 3. Example showing the selection of the input parameters (purple, green, pink and brown cells), and the MeanSize (blue frame), RD (red frame) and Results (light blue frame) arrays in Excel. The parameter

{\mathit {returnPartitionMetrics}}={\text{True}}

in this example.

SysCAD

The Pivot partition is available from the MetDynamics*GravityConcentrator and MetDynamics*DenseMedium unit models.

The sections and variable names used in the SysCAD interface are described in detail in the following tables.

Note that a Con and Partition page is provided provided for each connected concentrate discharge stream of the MetDynamics*GravityConcentrator model.

MD_GravityConcentrator page

The first tab page in the access window will have this name.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Tag	Display	This name tag may be modified with the change tag option.
Condition	Display	OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount	Display	The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc	Display	This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here. If this field is blank, then SysCAD will display the unit class ID.
Requirements
On	CheckBox	This enables the unit. If this box is not checked, then the MassFracToCon option appears below.
MassFracToCon	Input	Only appears if the On field above is not checked. Specifies the fraction of feed mass that reports to the concentrate stream when the model is off.
Options
ShowQFeed	CheckBox	QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
SizeForPassingFracCalc	Input	Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc	Input	Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm	Display	The total mass flow in each stream.
SolidMassFlow / SQm	Display	The Solids mass flow in each stream.
LiquidMassFlow / LQm	Display	The Liquid mass flow in each stream.
VolFlow / Qv	Display	The total Volume flow in each stream.
Temperature / T	Display	The Temperature of each stream.
Density / Rho	Display	The Density of each stream.
SolidFrac / Sf	Display	The Solid Fraction in each stream.
LiquidFrac / Lf	Display	The Liquid Fraction in each stream.
Passing	Display	The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes	Display	The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.

Con page

The Con page is used to specify the selected model input parameters.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Stage
On	Checkbox	This enables the stage. If off, the feed to this stage passes directly to the next stage (or tail) without partition.
Method	Partition (User)	The partition to concentrate for each size interval is defined by the user.
	Partition (Pivot)	The partition to concentrate for each size interval is defined by the Pivot model.
	Partition (Stochastic)	The partition to concentrate for each size interval is defined by the Stochastic model.
	Partition (Bazin)	The partition to concentrate for each size interval is defined by the Bazin model.
	Jig (King)	The partition to concentrate for each size interval is defined by the King jig stratification model.
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
PivotPartition / Yp	Input	Partition at pivot point.
PivotDensity / Rhop	Input	Density at pivot point.
EpCoefficient	Input	Coefficient of the size equation.
EpExponent	Input	Exponent of the size equation.
Liquids
LiquidsSeparMethod	Split To Con (User)	Liquids are split to concentrate by a user-defined fraction of liquids in the feed.
	Con Solids Fraction	Sufficient liquids mass is recovered to the concentrate stream to yield the user-defined concentrate solids mass fraction value (if possible).
	Con Liquids Fraction	Sufficient liquids mass is recovered to the concentrate stream to yield the user-defined concentrate liquids mass fraction value (if possible).
ConSolidsFracReqd / Con.SfReqd	Input	Required value of the mass fraction of solids in the concentrate stream. Only visible if Con Solids Fraction is selected.
ConLiquidsFracReqd / Con.LfReqd	Input	Required value of the mass fraction of liquids in the concentrate stream. Only visible if Con Liquids Fraction is selected.
LiqSplitToCon / Con.LiqSplit	Input/Display	The fraction of feed liquids recovered to the concentrate stream.

Partition page

The Partition page is used to specify or display the partition by species and size values.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Distribution
Name	Display	Shows the name of the SysCAD Size Distribution (PSD) quality associated with the feed stream.
IntervalCount	Display	Shows the number of size intervals in the SysCAD Size Distribution (PSD) quality associated with the feed stream.
SpWithPSDCount	Display	Shows the number of species in the feed stream assigned with the SysCAD Size Distribution (PSD) quality.
CumulativePartition
Method	Model/User	Select model-calculated or user-defined cumulative partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
All (All column)	Display	Actual overall cumulative partition to concentrates of all solid species, for each size interval. Excludes solid species not present in the gravity concentrator feed.
CumulativePartition	Display	Cumulative partition to concentrates for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the gravity concentrator feed or not.
All (All row, All column)	Display	Displays the actual, total, cumulative partition of all solids with a particle size distribution property in the feed to concentrates. Excludes solid species not present in the gravity concentrator feed.
All (All row, per species)	Display	Actual overall cumulative partition to concentrates for each solid species, for all size intervals in that species. Excludes solid species not present in the gravity concentrator feed.
Partition
Method	Model/User	Select model-calculated or user-defined partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
All (All column)	Display	Actual overall partition to concentrate of all solid species, for each size interval. Excludes solid species not present in the gravity concentrator feed.
Partition	Display	Partition to concentrate for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the gravity concentrator feed or not.
All (All row, All column)	Display	Displays the actual, total, partition of all solids with a particle size distribution property in the feed to concentrate. Excludes solid species not present in the gravity concentrator feed.
All (All row, per species)	Display	Actual overall partition to concentrate for each solid species, for all size intervals in that species. Excludes solid species not present in the gravity concentrator feed.
PartitionMetrics
d50	Display	Cut size (d50) of separation of each ore species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
CutDensity / Rho50	Display	Cut density (Rho50) of all particles in each size interval.
EcartProbable / Ep	Display	Ecart Probable of all particles in each size interval.
PivotPartition / Yp	Display	Partition at pivot point.

MD_DenseMedium page

The first tab page in the access window will have this name.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Tag	Display	This name tag may be modified with the change tag option.
Condition	Display	OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount	Display	The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc	Display	This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here. If this field is blank, then SysCAD will display the unit class ID.
Requirements
On	CheckBox	This enables the unit. If this box is not checked, then the MassFracToSinks option appears below.
MassFracToSinks	Input	Only appears if the On field above is not checked. Specifies the fraction of feed mass that reports to the sinks stream when the model is off.
Method	Partition (User)	The partition to sinks for each size interval is defined by the user.
	Partition (Pivot)	The partition to sinks for each size interval is defined by the Pivot model.
	Partition (Stochastic)	The partition to sinks for each size interval is defined by the Stochastic model.
	Drum (Baguley)	The Baguley dense medium drum model is used to determine the partition of solids to sinks and floats for each size interval.
Options
ShowQFeed	CheckBox	QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
ShowQSinks	CheckBox	QSinks and associated tab pages (eg Sp) will become visible, showing the properties of the sinks stream.
ShowQFloats	CheckBox	QFloats and associated tab pages (eg Sp) will become visible, showing the properties of the floats stream.
SizeForPassingFracCalc	Input	Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc	Input	Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm	Display	The total mass flow in each stream.
SolidMassFlow / SQm	Display	The Solids mass flow in each stream.
LiquidMassFlow / LQm	Display	The Liquid mass flow in each stream.
VolFlow / Qv	Display	The total Volume flow in each stream.
Temperature / T	Display	The Temperature of each stream.
Density / Rho	Display	The Density of each stream.
SolidFrac / Sf	Display	The Solid Fraction in each stream.
LiquidFrac / Lf	Display	The Liquid Fraction in each stream.
Passing	Display	The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes	Display	The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.

Pivot page

The Pivot page is used to specify the required model method and associated input parameters.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Pivot
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
PivotPartition / Yp	Input	Partition at pivot point.
PivotDensity / Rhop	Input	Density at pivot point.
EpCoefficient	Input	Coefficient of the size equation.
EpExponent	Input	Exponent of the size equation.
Liquids
LiquidsSeparMethod	Split To Sinks (User)	Liquids are split to sinks by a user-defined fraction of liquids in the feed.
	Sinks Solids Fraction	Sufficient liquids mass is recovered to the sinks stream to yield the user-defined sinks solids mass fraction value (if possible).
	Sinks Liquids Fraction	Sufficient liquids mass is recovered to the sinks stream to yield the user-defined sinks liquids mass fraction value (if possible).
SinksSolidsFracReqd / Sinks.SfReqd	Input	Required value of the mass fraction of solids in the sinks stream. Only visible if Sinks Solids Fraction is selected.
SinksLiquidsFracReqd / Sinks.LfReqd	Input	Required value of the mass fraction of liquids in the sinks stream. Only visible if Sinks Liquids Fraction is selected.
LiqSplitToSinks / Sinks.LiqSplit	Input/Display	The fraction of feed liquids recovered to the sinks stream.

Partition page

The Partition page is used to specify or display the partition by species and size values.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
Distribution
Name	Display	Shows the name of the SysCAD Size Distribution (PSD) quality associated with the feed stream.
IntervalCount	Display	Shows the number of size intervals in the SysCAD Size Distribution (PSD) quality associated with the feed stream.
SpWithPSDCount	Display	Shows the number of species in the feed stream assigned with the SysCAD Size Distribution (PSD) quality.
Partition
Method	Model/User	Select model-calculated or user-defined partition to separate each solids species type.
Density	Display	Density of each solid species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
All (All column)	Display	Actual overall partition to sinks of all solid species, for each size interval. Excludes solid species not present in the dense medium separator feed.
Partition	Display	Partition to sinks for each size interval, in each solid species, as determined by the selected model or user defined value. Note: These values are displayed regardless of whether the solid species is present in the dense medium separator feed or not.
All (All row, All column)	Display	Displays the actual, total, partition of all solids with a particle size distribution property in the feed to sinks. Excludes solid species not present in the dense medium separator feed.
All (All row, per species)	Display	Actual overall partition to sinks for each solid species, for all size intervals in that species. Excludes solid species not present in the dense medium separator feed.
PartitionMetrics
d50	Display	Cut size (d50) of separation of each ore species.
Size	Display	Size of each interval in mesh series.
MeanSize	Display	Geometric mean size of each interval in mesh series.
CutDensity / Rho50	Display	Cut density (Rho50) of all particles in each size interval.
EcartProbable / Ep	Display	Ecart Probable of all particles in each size interval.
PivotPartition / Yp	Display	Partition at pivot point.

About page

This page is provides product and licensing information about the Met Dynamics Models SysCAD Add-On.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
About
HelpLink		Opens a link to the Installation and Licensing page using the system default web browser. Note: Internet access is required.
Information		Copies Product and License information to the Windows clipboard.
Product
Name	Display	Met Dynamics software product name
Version	Display	Met Dynamics software product version number.
BuildDate	Display	Build date and time of the Met Dynamics Models SysCAD Add-On.
License
File		This is used to locate a Met Dynamics software license file.
Location	Display	Type of Met Dynamics software license or file name and path of license file.
SiteCode	Display	Unique machine identifier for license authorisation.
ReqdAuth	Display	Authorisation level required, MD-SysCAD Full or MD-SysCAD Runtime.
Status	Display	License status, LICENSE_OK indicates a valid license, other messages report licensing errors.
IssuedTo	Display	Only visible if Met Dynamics license file is used. Name of organisation/seat the license is authorised to.
ExpiryDate	Display	Only visible if Met Dynamics license file is used. License expiry date.
DaysLeft	Display	Only visible if Met Dynamics license file is used. Days left before the license expires.

Additional notes

Solid species that do not possess a particle size distribution property are split according to the overall mass split of the default particle size distribution species selected in the SysCAD Project Configuration.
If the default particle size distribution species is not present in the unit feed, the overall split of all other species with particle size distributions combined is used, as determined by the model.
Gas phase species report directly to the tail/floats stream without split.

References

↑ ^1.0 ^1.1 Scott, I.A. and Napier-Munn, T.J., 1992. A dense medium cyclone model based on the pivot phenomenon. Transactions of the Institute of Mining and Metallurgy Section C Mineral Processing and Extractive Metallurgy, 101, pp.C61-C76.
↑ Rao, B.V., Kapur, P.C. and Konnur, R., 2003. Modeling the size–density partition surface of dense-medium separators. International Journal of Mineral Processing, 72(1-4), pp.443-453.
↑ King, R.P., Juckes, A.H. and Stirling, P.A., 1992. A quantitative model for the prediction of fine coal cleaning in a spiral concentrator. Coal preparation, 11(1-2), pp.51-66.

[Scott_and_Napier-Munn_(1992)-1] 1.0 ^1.1 Scott, I.A. and Napier-Munn, T.J., 1992. A dense medium cyclone model based on the pivot phenomenon. Transactions of the Institute of Mining and Metallurgy Section C Mineral Processing and Extractive Metallurgy, 101, pp.C61-C76.

[Rao_et_al._(2003)-2] Rao, B.V., Kapur, P.C. and Konnur, R., 2003. Modeling the size–density partition surface of dense-medium separators. International Journal of Mineral Processing, 72(1-4), pp.443-453.

[King_al._(1992)-3] King, R.P., Juckes, A.H. and Stirling, P.A., 1992. A quantitative model for the prediction of fine coal cleaning in a spiral concentrator. Coal preparation, 11(1-2), pp.51-66.

[1]

[2]

[3]

@@ Line 1: / Line 1: @@
 == Description ==
-This article describes the Pivot function for the partition of particles by size and density.{{Scott and Napier-Munn (1992)}}
+This article describes the '''Pivot model''' equation for the partition of particles by size and density in a dense medium cyclone.{{Scott and Napier-Munn (1992)}}
+The Pivot model may also be applicable to other dense medium and gravity concentration processes, based indirectly on Rao et al.'s (2003) derivation of the Pivot model from the [[Partition (Density, Stochastic)|Stochastic model]] and the presented data analyses.{{Rao et al. (2003)}}
 == Model theory ==
-{{Under construction|section}}
+[[File:PartitionPivot2.png|thumb|500px|Figure 1. Pivot model partition to sinks. Each coloured line represents a particle class with the geometric mean size indicated in the series label. The pivot point is evident at a density of 2.0 t/m<sup>3</sup>.]]
+[[File:PartitionPivot3.png|thumb|500px|Figure 2. Pivot model partition to sinks, using the same model parameters as Figure 1. Each coloured line represents a density class with the specific gravity indicated in the series label.]]
+Scott and Napier-Munn (1992) derived an empirical equation that describes the partition of particles of a given size and density to the sinks stream of a dense medium cyclone.{{Scott and Napier-Munn (1992)}}
+Scott and Napier-Munn's approach is based on the observed ''pivot phenomenon'' where the partition curves of particles of all sizes appear to 'pivot' at a unique density value, as illustrated in Figure 1.
+The proposed ''Pivot model'' equation is:
+:<math>Y_{ij} = \dfrac{1}{1 + \exp \left \{ \ln ({Y_{\rm p}}^{-1} - 1) + \ln 3 \left (\dfrac{\rho_{\rm p} - (\rho_{\rm S})_{ij}}{k \bar {d_i}^n} \right )\right \}}</math>
+where:
+* <math>i</math> is the index of the size interval, <math>i = \{1,2,\dots,q\}</math>, <math>q</math> is the number of size intervals
+* <math>j</math> is the index of the density class, <math>j = \{1,2,\dots,m\}</math>, <math>m</math> is the number of density classes
+* <math>Y_{ij}</math> is the fraction of the mass of particles in size class <math>i</math> and density class <math>j</math> which are partitioned (recovered) to the sinks stream (frac)
+* <math>\rho_{\rm p}</math> is the pivot density (t/m<sup>3</sup>)
+* <math>\rho_{\rm S}</math> is the particle density (t/m<sup>3</sup>)
+* <math>Y_{\rm p}</math> is the partition to sinks at the pivot density (frac)
+* <math>k</math> is the Ecart Probable size coefficient
+* <math>n</math> is the Ecart Probable size exponent
+* <math>\bar d_{i}</math> is the [[Conversions|geometric mean size]] of particles in size interval <math>i</math> (mm)
+===Partition metrics ===
+Several metrics are provided to characterise the Pivot model partition curve.
+The <math>d_{50}</math>, also known as the ''cut or separation size'', is defined as the size of a particle of a given density which has an even (50%) chance of appearing in either the sinks or floats stream. The <math>d _{50}</math> size is obtained by rearranging the Pivot model:
+:<math>d_{50} = \left ( \dfrac{\ln 3}{k} \dfrac{(\rho_j - \rho_{\rm p})}{\ln ({Y_{\rm p}}^{-1} - 1)} \right ) ^ {\frac{1}{n}}</math>
+which is only defined when <math>(\rho_j > \rho_{\rm p}, Y_{\rm p} \leq 0.5)</math> or <math>(\rho_j < \rho_{\rm p}, Y_{\rm p} \geq 0.5)</math>
+The <math>\rho_{50}</math>, also known as the ''cut or separation density'', is defined as the density of a particle of a given size which has an even (50%) chance of appearing in either the sinks or floats stream. The <math>\rho _{50}</math> density is obtained by rearranging the Pivot model:
+:<math>\rho_{50} = \rho_{\rm p} + \dfrac{k \bar {d_i}^n}{\ln 3} \ln ( {Y_{\rm p}}^{-1} - 1)</math>
+The ''Ecart Probable'', or <math>E_{\rm p}</math>, is a measure of the deviation of a partition curve from a perfect separation, and is typically defined for density separations as:
+:<math>E_{\rm p} = \dfrac{\rho_{75} - \rho_{25}}{2}</math>
+where <math>\rho_{75}</math> and <math>\rho_{25}</math> are the densities of particles which have a 75% and 25% probability, respectively, of appearing in the sinks stream.
+{{Model theory (Text, Gravity Concentrator, Middlings)}}
 == Excel ==
-{{Under construction|section}}
 The Pivot partition equation may be invoked from the Excel formula bar with the following function call:
-<syntaxhighlight lang="vb">=mdPartition_Pivot(MeanSize as Range, RD as Range, Yp as Double, rhop as Double, k as Double, n as Double)</syntaxhighlight>
+<syntaxhighlight lang="vb">=mdPartition_Pivot(MeanSize as Range, RD as Range, Yp as Double, rhop as Double, k as Double, n as Double, Optional returnPartitionMetrics as Bool = false)</syntaxhighlight>
 {{Excel (Text, Help, No Arguments)}}
+The input parameters and model results are defined below in matrix notation, along with an example image showing the selection of the same cells in the Excel interface:
+:{|
+|- style="vertical-align:top;"
+|
+<math>
+\begin{align}
+MeanSize & =
+\begin{bmatrix}
+\bar{d}_1\text{ (mm)}\\
+\vdots\\
+\bar{d}_q\text{ (mm)}\\
+\end{bmatrix}\\
+\\
+RD & = \begin{bmatrix}
+(\rho_{\rm S})_{1}\text{ (t/m}^\text{3}\text{)} & \dots & (\rho_{\rm S})_m\text{ (t/m}^\text{3}\text{)}\\
+\end{bmatrix}\\
+\\
+Y_{\rm p} & = \big [Y_{\rm p} \text{ (frac)} \big ]\\
+rhop & = \big [\rho_{\rm p} \text{ (t/m}^3\text{))}\big ]\\
+k & = \big [k\text{ (-)} \big ]\\
+n & = \big [n\text{ (-)} \big ]\\
+returnPartitionMetrics & = \big [(\text{True / False)} \big ]\\
+\\
+\\
+mdPartition\_Pivot & =
+\begin{bmatrix}
+\begin{bmatrix}
+Y_{11}\text{ (t/h)} & \dots & Y_{1m}\text{ (t/h)}\\
+\vdots & \ddots & \vdots\\
+Y_{q1}\text{ (t/h)} & \dots & Y_{qm}\text{ (t/h)}\\
+\end{bmatrix}
+&
+\begin{bmatrix}
+(\rho_{50})_1\text{ (t/m}^3\text{)}\\
+\vdots\\
+(\rho_{50})_q\text{ (t/m}^3\text{)}\\
+\end{bmatrix}^{\rm *}
+&
+\begin{bmatrix}
+(E_{\rm p})_1\text{ (t/m}^3\text{)}\\
+\vdots\\
+(E_{\rm p})_q\text{ (t/m}^3\text{)}\\
+\end{bmatrix}^{\rm *}
+&
+\begin{array}{c}
+\begin{bmatrix}
+(d_{50})_{1}\text{ (mm)} & \dots & (d_{50})_m\text{ (mm)}\\
+\end{bmatrix}^{\rm *}
+\\
+\\
+\\
+\\
+\end{array}
+\end{bmatrix}
+\end{align}</math>
+where:
+* <math>n</math> is the number of size intervals
+* <math>m</math> is the number of density classes
+* <math>^*</math> indicates optional results returned if <math>\mathit{returnPartitionMetrics} = \text{True}</math>
+|- style="vertical-align:top;"
+| [[File:PartitionPivot1.png|frame|Figure 3. Example showing the selection of the input parameters (purple, green, pink and brown cells), and the '''MeanSize''' (blue frame), '''RD''' (red frame) and '''Results''' (light blue frame) arrays in Excel. The parameter <math>\mathit{returnPartitionMetrics} =\text{True}</math> in this example.]]
+|}
 == SysCAD ==
-{{Under construction|section}}
+The Pivot partition is available from the '''{{Name (Text, Company Name)|nospace=1}}*GravityConcentrator''' and '''{{Name (Text, Company Name)|nospace=1}}*DenseMedium''' unit models.
+The sections and variable names used in the SysCAD interface are described in detail in the following tables.
+Note that a '''Con''' and '''Partition''' page is provided provided for each connected concentrate discharge stream of the '''{{Name (Text, Company Name)|nospace=1}}*GravityConcentrator''' model.
+{{SysCAD (Page, Gravity Concentrator, DLL*GravityConcentrator)}}
+==== Con page ====
+The Con page is used to specify the selected model input parameters.
+{{SysCAD (Text, Table Header)}}
+{{SysCAD (Text, Gravity Concentrator, Con)}}
+{{SysCAD (Text, Help Link)}}
+{{SysCAD (Text, Partition, Pivot)}}
+{{SysCAD (Text, Gravity Concentrator, Liquids)|method=0}}
+|}
+{{SysCAD (Page, Hydrocyclone, Partition)|ActionU=Partition|ActionL=partition|DestinationU=Concentrate|DestinationL=concentrate|UnitL=gravity concentrator|GravityMetrics=true|Cumulative=true}}
+{{SysCAD (Page, Dense Medium, DLL*DenseMedium)}}
+==== Pivot page ====
+The Pivot page is used to specify the required model method and associated input parameters.
+{{SysCAD (Text, Table Header)}}
+|-
+! colspan="3" style="text-align:left;" |''Pivot''
+{{SysCAD (Text, Help Link)}}
+{{SysCAD (Text, Partition, Pivot)}}
+{{SysCAD (Text, Dense Medium, Liquids)|method=0}}
+|}
+{{SysCAD (Page, Hydrocyclone, Partition)|ActionU=Partition|ActionL=partition|DestinationU=Sinks|DestinationL=sinks|UnitL=dense medium separator|GravityMetrics=true}}
+{{SysCAD (Page, About)}}
+==== Additional notes ====
+{{SysCAD (Text, No PSD Splits)|gasstream=tail/floats}}
+== See also ==
+* [[Partition (Density, Stochastic)]]
 == References ==

Partition (Density, Pivot): Difference between revisions

Latest revision as of 15:18, 17 May 2024

Contents

Description