Description
This article describes the model of Autogenous (AG) and Semi-Autogenous (SAG) mills by Leung (1987), with the variable breakage rates extension of Mutambo (Morrell and Morrison, 1996).[1][2][3]
Model theory
 This section is currently under construction. Please check back later for updates and revisions.
|
Excel
| This section is currently under construction. Please check back later for updates and revisions.
|
The Mutambo AG/SAG mill model may be invoked from the Excel formula bar with the following function call:
=mdUnit_AGSAG_Mutambo(Parameters as Range, Size as Range, MillNewFeed as Range, MillRecycleFeed as Range, OreSG as Range, OreBreakageParams as Range)
Invoking the function with no arguments will print Help text associated with the model, including a link to this page.
SysCAD
| This section is currently under construction. Please check back later for updates and revisions.
|
References
- ↑ Napier-Munn, T.J., Morrell, S., Morrison, R.D. and Kojovic, T., 1996. Mineral comminution circuits: their operation and optimisation. Julius Kruttschnitt Mineral Research Centre, Indooroopilly, QLD.
- ↑ Leung, K., Morrison, R.D. and Whiten, W.J., 1987. An Energy Based Ore Specific Model for Autogenous and Semi-autogenous Grinding, Copper 87, Vina del Mar, Vol. 2, pp 71 - 86
- ↑ Morrell, S. and Morrison, R.D., 1996. AG and SAG mill circuit selection and design by simulation. In International Conference on Autogenous and Semiautogenous Grinding Technology (Vol. 2, pp. 769-790).
This section is currently under construction. Please check back later for updates and revisions.