Tumbling Mill (Power, Hogg and Fuerstenau)

Description

This article describes the Hogg and Fuerstenau (1972) method for estimating the power draw of a tumbling mill.

Model theory

This content is available to registered users. Please log in to view.

Excel

The Hogg and Fuerstenau mill power model may be invoked from the Excel formula bar with the following function call:

=mdMillPower_HoggFuerstenau(Parameters as Range)

Invoking the function with no arguments will print Help text associated with the model, including a link to this page.

The Parameters array and model results are defined below in matrix notation, along with an example image showing the selection of the same arrays in the Excel interface:

[math]\displaystyle{ Parameters= \begin{bmatrix} \text{Mill type}\\ D\text{ (m)}\\ L\text{ (m)}\\ N_{\rm c}\text{ (frac)}\\ J\text{ (v/v)}\\ J_{\rm b}\text{ (v/v)}\\ J_{\rm p}\text{ (v/v)}\\ \alpha\text{ (deg.)}\\ (1-\eta)\text{ (kW/kW)}\\ f_{\rm s}\text{ (w/w)}\\ \rho_{\rm m}\text{ (t/m}^{\text{3}}\text{)}\\ \rho_{\rm b}\text{ (t/m}^{\text{3}}\text{)}\\ f_{\rm v}\text{ (v/v)}\\ \end{bmatrix},\;\;\;\;\;\; mdMillPower\_HoggFuerstenau= \begin{bmatrix} P_{\rm gross}\text{ (kw)}\\ P_{\rm net}\text{ (kw)}\\ P_{\rm b}\text{ (kw)}\\ P_{\rm r}\text{ (kw)}\\ P_{\rm s}\text{ (kw)}\\ P_{\rm o}\text{ (kw)}\\ \text{Charge volume (m}^{\text{3}}\text{)}\\ \text{Ball mass (t)}\\ \text{Rock mass (t)}\\ \text{Interstital slurry mass (t)}\\ \text{Above balls slurry mass (t)}\\ \rho_{\rm p}\text{ (t/m}^{\text{3}}\text{)}\\ \rho_{\rm ap}\text{ (t/m}^{\text{3}}\text{)}\\ \end{bmatrix}\;\;\;\;\;\;\;\;\;\;\;\; }[/math] where: [math]\displaystyle{ \text{Mill type} }[/math] is the type of mill, 0 = autogenous or semi-autogenous, 1 = ball [math]\displaystyle{ \text{Charge volume} }[/math] is the volume of the charge (m3) [math]\displaystyle{ \text{Ball mass} }[/math] is the mass of balls in the mill (t) [math]\displaystyle{ \text{Rock mass} }[/math] is the mass of rocks in the mill (t) [math]\displaystyle{ \text{Interstitial slurry mass} }[/math] is the mass of slurry in the interstitial charge void space (t) [math]\displaystyle{ \text{Above slurry mass} }[/math] is the mass of excess slurry above the charge (t)

Figure 2. Example showing the selection of the Parameters (blue frame), and Results (light blue frame) arrays in Excel.

Please note the Excel function expects the mill diameter ([math]\displaystyle{ D }[/math]) and length ([math]\displaystyle{ L }[/math]) values in units of meters, which are internally converted to feet for use in the power equation presented above.

SysCAD

The Hogg and Fuerstenau power model is an optional calculation for tumbling mill units. If selected, the input and display parameters below are shown.

Tag (Long/Short)	Input / Display	Description/Calculated Variables/Options
HoggFuerstenau
HelpLink		Opens a link to this page using the system default web browser. Note: Internet access is required.
MillType	AG/SAG or Ball/Rod	Type of mill, AG/SAG (RockMass, no AboveBallsSLMass) or Ball (AboveBallsSLMass, no RockMass).
MillDiameter	Input/Display	Diameter of the mill (inside liners).
MillLength	Input/Display	Length of the mill (inside liners).
FracCS	Input/Display	Fraction critical speed of the mill.
ChargeFilling	Input/Display	Volumetric fraction of the mill filled with charge, including balls and interstitial voids between balls.
BallFilling	Input/Display	Volumetric fraction of the mill filled with balls, including slurry and interstitial voids between balls.
InterstialSLFill	Input/Display	Volumetric fraction of the interstitial charge void space occupied by slurry.
LiftAngle	Input	Lift angle of the charge.
PowerLosses	Input	Fraction of power lost due to mill drive efficiency ([math]\displaystyle{ =1-\eta }[/math]).
SolidsFraction	Display	Mass fraction of solids in the slurry phase.
OreDensity	Display	Density of solids.
BallDensity	Input/Display	Density of balls.
Voidage	Input/Display	Volumetric fraction of interstitial void space in the charge
ChargeVolume	Display	Volume of charge in the mill.
BallMass	Display	Mass of balls in the mill.
RockMass	Display	Mass of coarse rocks in the mill (AG/SAG only).
InterstitialSLMass	Display	Mass of slurry occupying charge void space.
AboveBallsSLMass	Display	Mass of excess slurry resident outside/above charge (Ball mill only).
RhoSlurry	Display	Density of slurry phase.
ApparentDensity	Display	Density of total charge (including balls, rock, slurry and voids).
BallsPower	Display	Power drawn by the ball component of the mill load.
RocksPower	Display	Power drawn by the rock component of the mill load.
SlurryPower	Display	Power drawn by the interstitial slurry component of the mill load.
OverfillingPower	Display	Power drawn by the overfilling, or excess, slurry component of the mill load (when the interstitial voids are completely filled with slurry).
NetPower	Display	Net power drawn by the mill (excluding drive inefficiencies).
GrossPower	Display	Gross power drawn by the mill (including drive inefficiencies).

See also

• Mill (Herbst-Fuerstenau)
• Ball Mill (Perfect Mixing)
• Ball Mill (Perfect Mixing, Dynamic)