Template:SysCAD (Page, Mill, DLL*Mill): Difference between revisions

From Met Dynamics
Jump to navigation Jump to search
m (1 revision imported)
md>Scott.Munro
Line 14: Line 14:
|This enables the unit. If this box is not checked, then the material will pass straight through the mill with no change to the size distribution.
|This enables the unit. If this box is not checked, then the material will pass straight through the mill with no change to the size distribution.
|- style="vertical-align:top;"
|- style="vertical-align:top;"
|rowspan="3" | Method
|rowspan="6" | Method
|Fixed Discharge
|The discharge particle size distribution is user defined. Different distributions can be used for different solids.
|- style="vertical-align:top;"
|AG/SAG (Variable Rates)
|The [[AG/SAG Mill (Variable Rates)|Variable Rates AG/SAG mill model]] is used to determine the mill product size distribution. Different parameters can be used for different solids.
|- style="vertical-align:top;"
|Rod Mill (Lynch)
|The [[Rod Mill (Lynch)|Lynch rod mill model]] is used to determine the mill product size distribution. Different parameters can be used for different solids.
|- style="vertical-align:top;"
|Ball (Perfect Mixing)
|Ball (Perfect Mixing)
|The Perfect Mixing ball mill model ([[Ball Mill (Perfect Mixing)|steady-state]] or [[Ball Mill (Perfect Mixing, Dynamic)|dynamic]]) is used to determine the mill product size distribution. Different parameters can be used for different solids.
|The Perfect Mixing ball mill model ([[Ball Mill (Perfect Mixing)|steady-state]] or [[Ball Mill (Perfect Mixing, Dynamic)|dynamic]]) is used to determine the mill product size distribution. Different parameters can be used for different solids.
Line 27: Line 36:
|CheckBox
|CheckBox
|Show alternative mill power model calculations on the '''Power''' page.
|Show alternative mill power model calculations on the '''Power''' page.
{{#switch: {{{method|}}}
| 1 =  |
{{!}}-
{{!}}MediaTrajectory
{{!}}CheckBox
{{!}}Show mill media rolling, sliding and free flight trajectory computations on the '''MediaTraj''' page.
}}
|-
|-
|MediaStrings
|MediaStrings
Line 33: Line 49:
{{#switch: {{{method|}}}  
{{#switch: {{{method|}}}  
| 1 =  |  
| 1 =  |  
{{!}}-
{{!}}MediaTrajectory
{{!}}CheckBox
{{!}}Show mill media rolling, sliding and free flight trajectory computations on the '''MediaTraj''' page.
{{!}}-
{{!}}-
{{!}}OverfillingIndicator
{{!}}OverfillingIndicator

Revision as of 09:38, 24 March 2023

MetDynamics*Mill page

The first tab page in the access window will have this name.

Tag (Long/Short) Input / Display Description/Calculated Variables/Options
Tag Display This name tag may be modified with the change tag option.
Condition Display OK if no errors/warnings, otherwise lists errors/warnings.
ConditionCount Display The current number of errors/warnings. If condition is OK, returns 0.
GeneralDescription / GenDesc Display This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field on the Info tab (see below), this will be displayed here.

If this field is blank, then SysCAD will display the unit class ID.

Requirements
On CheckBox This enables the unit. If this box is not checked, then the material will pass straight through the mill with no change to the size distribution.
Method Fixed Discharge The discharge particle size distribution is user defined. Different distributions can be used for different solids.
AG/SAG (Variable Rates) The Variable Rates AG/SAG mill model is used to determine the mill product size distribution. Different parameters can be used for different solids.
Rod Mill (Lynch) The Lynch rod mill model is used to determine the mill product size distribution. Different parameters can be used for different solids.
Ball (Perfect Mixing) The Perfect Mixing ball mill model (steady-state or dynamic) is used to determine the mill product size distribution. Different parameters can be used for different solids.
Stirred (Perfect Mixing) The Perfect Mixing stirred mill model (steady-state or dynamic) is used to determine the mill product size distribution. Different parameters can be used for different solids.
Mill (Herbst-Fuerstenau) The Herbst-Fuerstenau model is used to determine the mill product size distribution. Different parameters can be used for different solids.
PowerModels CheckBox Show alternative mill power model calculations on the Power page.
MediaTrajectory CheckBox Show mill media rolling, sliding and free flight trajectory computations on the MediaTraj page.
MediaStrings CheckBox Show media size distributions at recharge equilibrium on the MediaStrings page.
OverfillingIndicator CheckBox Show overflow ball mill slurry volume, residence time, and overfilling evaluation on Overfilling page.
Options
ShowQFeed CheckBox QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
ShowQProd CheckBox QProd and associated tab pages (eg Sp) will become visible, showing the properties of the products.
SizeForPassingFracCalc Input Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
FracForPassingSizeCalc Input Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.
Stream Summary
MassFlow / Qm Display The total mass flow in each stream.
SolidMassFlow / SQm Display The Solids mass flow in each stream.
LiquidMassFlow / LQm Display The Liquid mass flow in each stream.
VolFlow / Qv Display The total Volume flow in each stream.
Temperature / T Display The Temperature of each stream.
Density / Rho Display The Density of each stream.
SolidFrac / Sf Display The Solid Fraction in each stream.
LiquidFrac / Lf Display The Liquid Fraction in each stream.
Passing Display The mass fraction passing the user-specified size (in the field SizeForPassingFracCalc) in each stream.
Passes Display The user-specified (in the field FracForPassesSizeCalc) fraction of material in each stream will pass this size fraction.