View source for Template:SysCAD (Page, Magnetic Separator, DLL*Magnetic Separator)

{{#if: {{{lowerHeadings=true|}}} |=}}==== {{SysCAD (Text, UnitType Prefix)}}MagneticSeparator page {{#if: {{{lowerHeadings|}}} |=}}====

The first tab page in the access window will have this name.

{{SysCAD_Table_Header}}

{{SysCAD_First_Page}}

|-
! colspan="3" style="text-align:left;" |''Requirements''
|-
|On
|CheckBox
|This enables the unit. If this box is not checked, then the ''MassFracToMags'' option appears below.
|-
|MassFracToMags
|Input
|Only appears if the ''On'' field above is not checked. Specifies the fraction of feed mass that reports to the magnetics stream when the model is off.
|- style="vertical-align:top;"
|rowspan="3" | Method
|User Defined
|The recovery to magnetics for each size interval is defined by the user.
|- style="vertical-align:top;"
|WLIMS (King & Schneider)
|The recovery to magnetics for each size interval is defined by the [[WLIMS (King and Schneider)|King and Schneider model]].
|- style="vertical-align:top;"
|WHIMS (Dobby and Finch)
|The recovery to magnetics for each size interval is defined by the [[WHIMS (Dobby and Finch)|Dobby and Finch model]].
|- style="vertical-align:top;"
|-
! colspan="3" style="text-align:left;" |''Options''
|-
|ShowQFeed
|CheckBox
|QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
|-
|ShowQMags
|CheckBox
|QMags and associated tab pages (eg Sp) will become visible, showing the properties of the magnetics stream.
|-
|ShowQNonMags
|CheckBox
|QNonMags and associated tab pages (eg Sp) will become visible, showing the properties of the non-magnetics stream.
|-
|SizeForPassingFracCalc
|Input
|Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
|-
|FracForPassingSizeCalc
|Input
|Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.

{{SysCAD_Stream_Summary}}