View source for Template:SysCAD (Page, Hydrocyclone, DLL*Hydrocyclone)

{{#if: {{{lowerHeadings=true|}}} |=}}==== {{SysCAD (Text, UnitType Prefix)}}Hydrocyclone page {{#if: {{{lowerHeadings|}}} |=}}====

The first tab page in the access window will have this name.

{{SysCAD_Table_Header}}

{{SysCAD_First_Page}}

|-
! colspan="3" style="text-align:left;" |''Requirements''
|-
|On
|CheckBox
|This enables the unit. If this box is not checked, then the ''MassFracToUF'' option appears below.
|-
|MassFracToUF
|Input
|Only appears if the ''On'' field above is not checked. Specifies the fraction of feed mass that reports to the underflow stream when the model is off.
|- style="vertical-align:top;"
|rowspan="7" | Method
|Partition (User)
|The partition to overflow for each size interval is defined by the user. Different values can be used for different solids.
|- style="vertical-align:top;"
|Partition (Reid-Plitt)
|The partition to overflow for each size interval is defined by a [[Partition (Size, Reid-Plitt)|Reid-Plitt efficiency curve]]. Different parameters can be used for different solids.
|- style="vertical-align:top;"
|Partition (Whiten-Beta)
|The partition to overflow for each size interval is defined by a [[Partition (Size, Whiten-Beta)|Whiten-Beta efficiency curve]]. Different parameters can be used for different solids.
|- style="vertical-align:top;"
|Nageswararao
|The [[Hydrocyclone (Nageswararao)|Nageswararao]] model is used to determine the partition of solids to underflow and overflow for each size interval.
|- style="vertical-align:top;"
||Narasimha-Mainza (2014)
|The [[Hydrocyclone (Narasimha-Mainza)|Narasimha-Mainza]] (2014) model is used to determine the partition of solids to underflow and overflow for each size interval.
|- style="vertical-align:top;"
|Narasimha-Mainza (Multi)
|The [[Hydrocyclone (Narasimha-Mainza)|Narasimha-Mainza]] (Multi) model is used to determine the partition of solids to underflow and overflow for each size interval.
|- style="vertical-align:top;"
|Plitt
|The [[Hydrocyclone (Plitt)|Plitt]] model is used to determine the partition of solids to underflow and overflow for each size interval.
|-
|RopingCalcs
|CheckBox
|Show addition calculations that predict the onset of cyclone underflow roping.
|-
! colspan="3" style="text-align:left;" |''Options''
|-
|ShowQFeed
|CheckBox
|QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
|-
|ShowQOF
|CheckBox
|QOF and associated tab pages (eg Sp) will become visible, showing the properties of the overflow stream.
|-
|ShowQUF
|CheckBox
|QUF and associated tab pages (eg Sp) will become visible, showing the properties of the underflow stream.
|-
|SizeForPassingFracCalc
|Input
|Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
|-
|FracForPassingSizeCalc
|Input
|Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.

{{SysCAD_Stream_Summary}}