View source for Template:SysCAD (Page, Dense Medium, DLL*DenseMedium)

{{#if: {{{lowerHeadings=true|}}} |=}}==== {{SysCAD (Text, UnitType Prefix)}}DenseMedium page {{#if: {{{lowerHeadings|}}} |=}}====

The first tab page in the access window will have this name.

{{SysCAD_Table_Header}}

{{SysCAD_First_Page}}

|-
! colspan="3" style="text-align:left;" |''Requirements''
|-
|On
|CheckBox
|This enables the unit. If this box is not checked, then the ''MassFracToSinks'' option appears below.
|-
|MassFracToSinks
|Input
|Only appears if the ''On'' field above is not checked. Specifies the fraction of feed mass that reports to the sinks stream when the model is off.
|- style="vertical-align:top;"
|rowspan="4" | Method
|Partition (User)
|The partition to sinks for each size interval is defined by the user.
|- style="vertical-align:top;"
|Partition (Pivot)
|The partition to sinks for each size interval is defined by the [[Partition (Density, Pivot)|Pivot model]].
|- style="vertical-align:top;"
|Partition (Stochastic)
|The partition to sinks for each size interval is defined by the [[Partition (Density, Stochastic)|Stochastic model]].
|- style="vertical-align:top;"
|Drum (Baguley)
|The [[Dense Medium Drum (Baguley)|Baguley dense medium drum]] model is used to determine the partition of solids to sinks and floats for each size interval.
|-
! colspan="3" style="text-align:left;" |''Options''
|-
|ShowQFeed
|CheckBox
|QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
|-
|ShowQSinks
|CheckBox
|QSinks and associated tab pages (eg Sp) will become visible, showing the properties of the sinks stream.
|-
|ShowQFloats
|CheckBox
|QFloats and associated tab pages (eg Sp) will become visible, showing the properties of the floats stream.
|-
|SizeForPassingFracCalc
|Input
|Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
|-
|FracForPassingSizeCalc
|Input
|Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.

{{SysCAD_Stream_Summary}}