View source for Template:SysCAD (Page, Gravity Concentrator, DLL*GravityConcentrator)

==== {{Name (Text, Company Name)|nospace=1}}*GravityConcentrator page ====

The first tab page in the access window will have this name.

{{SysCAD_Table_Header}}

{{SysCAD_First_Page}}

|-
! colspan="3" style="text-align:left;" |''Requirements''
|-
|On
|CheckBox
|This enables the unit. If this box is not checked, then the ''MassFracToCon'' option appears below.
|-
|MassFracToCon
|Input
|Only appears if the ''On'' field above is not checked. Specifies the fraction of feed mass that reports to the concentrate stream when the model is off.
|- style="vertical-align:top;"
|rowspan="3" | Method
|User Defined
|The partition to concentrate for each size interval is defined by the user.
|- style="vertical-align:top;"
|Pivot Model
|The partition to concentrate  for each size interval is defined by the [[Partition (Density, Pivot)|Pivot model]].
|- style="vertical-align:top;"
|Stochastic (Rao)
|The partition to concentrate for each size interval is defined by the [[Partition (Density, Stochastic)|Stochastic model]].
|-
! colspan="3" style="text-align:left;" |''Options''
|-
|ShowQFeed
|CheckBox
|QFeed and associated tab pages (eg Sp) will become visible, showing the properties of the combined feed stream.
|-
|ShowQOF
|CheckBox
|QOF and associated tab pages (eg Sp) will become visible, showing the properties of the overflow stream.
|-
|ShowQUF
|CheckBox
|QUF and associated tab pages (eg Sp) will become visible, showing the properties of the underflow stream.
|-
|SizeForPassingFracCalc
|Input
|Size fraction for % Passing calculation. The size fraction input here will be shown in the Stream Summary section.
|-
|FracForPassingSizeCalc
|Input
|Fraction passing for Size calculation. The fraction input here will be shown in the Stream Summary section.

{{SysCAD_Stream_Summary}}